Engine Mounts

Globe engine mounts are cast molded from two hardnesses of elastomer. The softer inner core provides vibration, noise and shock dampening, while the stiff outer shell restricts engine movement. They are easy to install with a wide range of sizes to fit almost every engine requirement.

 

Model	A	B	C	D	E	F	G	H	I	J
M-3A*	3/7/16	1.75	5/8	3/8	7/16	29/i6	1 7/32	1 5/16	15/16	3/8
M-3	3/7/16	1.75	5/8	3/8	7/16	29/16	1 7/32	1 5/16	15/16	3/8
M-5	41/2	2 7/16	5/8	3/8	1/2	3 3/8	1 3/4	1 7/16	13/16	7/16
M-6	5.375	3	1 1/8	1/2	5/8	4 1/4	2 5/16	1 9/16	1 1/8	1/2
M-7	5.375	3	1 1/8	1/2	3/4	4 1/4	2 5/16	1 1/2	1 1/8	1/2
M-8	71/8	4	1 1/4	5/8	1	5 1/2	2 7/8	2 3/8	1 13/16	9/16

 

Model	Rated Load in Pounds	Deflection at Average Rated Load	Center Bolt Size & Thread	Center Insert Length	Packaged Weight in Pounds
M-3A*	100-200	0.017	7/16-20	3/4	3/4
M-3	125-250	0.017	7/16-20	3/4	3/4
M-5	250-500	0.03	1/2-20	3/4	1
M-6	500-1000	0.027	5/8-18	7/8	1 1/4
M-7	500-1000	0.027	3/4-16	1	1112
M-8	1000-20001	0.03	1-8	1 1/2	3

Tolerance on all dimensions ±1/32.

*Normally used for generators, compressors, air conditioners, pumps and other auxiliary equipment.

NOTE- Do not use less than 80% of the thread length of the metal insert. Engine bracket should cover entire area of center core of the mount. Rear mounts should bear 60% of engine weight. Front mounts should bear 40% of engine weight. Installation Kits include engine bolt, core washer, spacer, and lock washer.

Talk to our parts department about
GLOBE engine mounts